• W-S Board

    Premium Waterproofing for Shower Construction

    Banner of GURU waterproofing products, highlighting advanced solutions for moisture protection.

  • W-S Board

    Premium Waterproofing for Shower Construction

The W-S Board provides a reliable waterproof base for your installations. Its lightweight yet sturdy construction makes it easy to handle and install, ensuring a perfect fit every time.

Lightweight construction board made of a XPS core factory bonded in both sides to WATER-STOP membrane exceeding
the core dimension – creating a WATER-STOP flange.

Developed according to IAPMO PS106 for tileable kit. Certified ANSI A118.10 and ANSI A118.12.

GURU shower waterproofing system, highlighting the use of W-S boards for superior moisture protection.

The W-S Board is a high-quality, waterproof shower construction panel designed for efficient and durable installations. Whether building new shower spaces or renovating existing ones, the W-S Board provides superior waterproofing and ease of installation on various surfaces including wood, metal, and drywall.

  • No banding required, except for steam shower.
  • Superior pull-out performance.
  • Reduces the building time.
  • It requires a 1/2″ width of W-S SEALANT on each side.

Why Choose W-S Board?

  • Complete Waterproofing

    Our W-S Board is completely waterproof, thanks to the included WATER-STOP film, making it ideal for use in bathrooms, showers, and other wet areas.

  • Versatile Installation

    Install the W-S Board on wooden structures, metal profiles, or existing partitions. The tongue and groove system ensures a secure fit both vertically and horizontally.

  • Easy Renovations

    Perfect for renovations, the W-S Board can be applied directly over old ceramic surfaces, creating a smooth, uniform base for new tile installations.

Measures

• 3’ x 5’ x 1/2”
• 4’ x 8’ x 1/2”
• 3’ x 5’ x 1/2” (Pre-cut at 3’ x 2.5’)
• 2’ x 8’ x 2”
• 2’ x 4’ x 2”

Installation Guide

1. Cutting: Use a utility knife to cut the board to size and create cutouts for pipes and fixtures.

2. Screws Placement:

  • Vertically: Maximum spacing of 12” (30 cm).
  • Horizontally: Maximum spacing of 16” (41 cm).
  • Ceilings: Maximum spacing of 6” (15 cm).

3.Installation: Start from the bottom, fixing the W-S Board to the wall studs. For tub walls, apply W-S Sealant adhesive along the top edge of the tub, not lower than 4” above the floor, and immediately install the W-S Board.

4. Fastening to Studs:

  • Wood: Use W-S Board screws and washers.
  • Metal: Use self-tapping screws.

5. Screw Length: Ensure screws reach a depth of at least 3/4” (19 mm) in wood studs and 3/8” (10 mm) in metal studs.

6. Sealing: W-S Board is waterproof, but all joints, corners, pipe penetrations, and fasteners must be sealed.

7. Puncture Points: Cover puncture points completely with W-S Sealant.

8. Panel Installation: Ensure a secure seal using the flange on the board.

9.Joint Waterproofing: Apply modified thin-set mortar with a 1/4” notched trowel. Use polymer-modified thin-set meeting ANSI A118.4, A118.11, or A118.15 standards.

10.Applying Flange: Lay the WATER-STOP flange, press firmly, and remove trapped air. Spread adhesive from the inside out using a margin trowel or similar.

11. Sealing Corners: Use preformed W-S Corners and follow the same procedure as the flanges.

12. Pipe Connections: Open pipe connection areas using a utility knife or drilling crown.

13. Sealing Pipe Areas: Seal with W-S Mixing Valve or W-S Pipe Connection products.

14. Tile Installation: Tiles can be installed immediately using polymer-modified thin-set without additives. Choose a notched trowel matching the tile format.

Video Installation Guide

  1. Surface Preparation: Ensure the surface is ready for installation, clean, and free of any debris.
  2. Installation: Apply the membrane carefully, following the product guidelines to achieve a secure fit.
  3. Sealing: Ensure all edges and seams are properly sealed to prevent water leakage.
  4. Final Checks: Inspect the installation to confirm everything is properly sealed and there are no gaps.